Kerosene Sconce by Artisan Jim Pounder. The Hanging bracket and arm are 2 pieces. The joint of the 2 allows the arm to swing freely, if desired. The slight bond of super glue can be overcome by grasping firmly the Arm body close to the bracket and work the superglue bond loose. To allow the axis of the hanging bracket to stay vertical, drive a very small nail through the hols at the bottom of the bracket to the wall. This Sconce has an LED light and works with a 12 Volt electrical system and is polarity sensitive. If lamp does not light, switch the wire polarity.
Size: 1"D x 1 1/2"H